WN Blog 012 – What Will Your Wi-Fi Project Cost? Find Out in Two Minutes

Matt thinking and Mac pointing at a floor plan, in front of the Wi-Fi Project Calculator showing an estimate of £6,775

"How much will it cost?"

Ask that about a Wi-Fi project and you tend to get one of two answers. "It depends." Or a meeting invite.

Both are fair. It does depend, and whoever's quoting needs to know a few things first. But when you're trying to work out whether you've got the budget to even start the conversation, neither one helps.

So we built the Wi-Fi Project Calculator. Tell it about your site and what you're trying to do, and it gives you the days, the travel and the cost in about two minutes. No account. No sales form. Nobody rings you.

Open the Wi-Fi Project Calculator

Mac with his arms folded and one eyebrow raised
"It depends." Mac, unconvinced.

Who it's for

Two groups of people, and it works a bit differently for each.

If you're buying Wi-Fi services, it tells you roughly what a design, a survey or a troubleshooting visit should cost before you speak to anyone. You walk into the conversation knowing what a sensible number looks like.

If you do Wi-Fi for a living, put your own day rate in and it's your estimate. Change the travel costs, add your project management percentage, download it as a Word document and put your own logo on it. If any of you like getting quotes out the door quicker, this one's for you.

What it works out

  • Your site: the venue type, the region and the floor area.
  • The service: a design with site surveys, a remote design, or troubleshooting.
  • The awkward bits: restricted access, out-of-hours work, travel and expenses.
  • The answer: delivery days, return trips and a total, line by line.

Then it gives you a PDF or a Word document to send to whoever signs things off.

The calculator's first step, Your site, with the estimate panel on the right

How to use it

I'm using Ninja HQ again, the made-up two-floor office from the last blog. It came out at 2,400 m², so that's the number going in.

1. Your site

Pick the venue type and the region, choose square feet or square metres, and type the area. That's the total across every floor that needs Wi-Fi.

Entering the site: switching to square metres and typing 2400, and the estimate appears on the right

The estimate shows up on the right as soon as there's an area, and it updates with every change you make after that.

Don't know the area? Two ways round it:

  • Measure it. Our free Floor Plan Area Tool works it out from your floor plans, and there's a link to it right under the area box.
  • Estimate it from a count. For some venues you can give a number you do know. Bedrooms for a hotel, workstations for an office, classrooms for a school, seats for a stadium. It uses a typical size for each (40 m² a bedroom, 12 m² a workstation, 55 m² a classroom) and adds an allowance for corridors and shared space. You can change every one of those figures.

The region sets the currency and the starting rates. There's the UK, Europe, the US, Canada and Asia Pacific, plus a custom option where you name the region and pick the currency.

And there's the day rate. It starts at 1,000 a day in whichever currency you've picked. That's an example, not our price list. Put in what you charge, or what you've been quoted, and everything recalculates.

2. Services

Three kinds of project. Reporting is included in all of them.

  • Wi-Fi Design & Site Surveys. A new network or a refresh. The predictive design and report are always in. Then you choose what happens on site.
  • Predictive Wi-Fi Design, remote only. You've got good floor plans and you want a design with no site visit. No travel, so it's the cheapest way in.
  • Troubleshooting & RF Assessment Survey. The network's already there and something's wrong with it. A site visit, findings and recommendations.
Choosing a service: clicking through the three services and ticking AP-on-a-stick, with the total changing each time

With the design service you can add:

  • Initial site investigation. Someone walks the building before the design is finished, looking for interference, awkward ceilings and places you can't mount an AP.
  • Post-deployment validation. Someone comes back once it's installed to check it does what the design said it would.
  • AP-on-a-stick testing. Testing real AP positions before anything is installed. It's where I started in this industry, tripod and all, and it's still the best way to be sure in a difficult building. Tell it how many locations you want tested and it works out the days.

Don't get me wrong, you won't need all three every time. A simple office with good plans might be a remote design and nothing else. That's totally fine if it meets your requirements. Tick and untick them and watch what each one does to the total.

3. Project details

This is where the real world gets in.

Project details: ticking restricted access and out of hours, and switching to double time, takes the estimate from £6,775 to £8,425
  • Restricted access. Escorts, permits, cleanrooms, wards. Tick it for the visits it applies to and it adds 25% to that time.
  • Out of hours. Surveying at night or over a weekend. Choose time and a half or double time.

In that clip I've made the site investigation restricted and the validation out of hours at double time. Ninja HQ goes from £6,775 to £8,425. Same building, same work, £1,650 more. Worth knowing before you promise someone a weekend survey.

Further down:

  • Travel. It works out the return trips from the days on site, with up to five site days a trip. You can set your own trip count, and switch travel time or expenses off altogether.
  • Expenses. Transport, hotel and food each have their own allowance. The UK defaults are £300 a return trip, £150 a night and £50 a day. Change them to match where the site is.
  • Project management. On by default at 10% of the delivery work. Change the percentage or turn it off.
The travel and expenses section, with the return trips worked out and allowances for transport, hotel and food

4. Your estimate

Press View full estimate and you get every line: the days, the rate and the amount.

The estimate step: adding a project name and client, then scrolling down the breakdown to the download buttons

Here's Ninja HQ, 2,400 m², UK, at the example rate:

The project breakdown for Ninja HQ: site investigation, design, validation, reporting, project management, travel time and expenses, totalling £6,775 before tax
  • Site investigation: 1.25 days
  • Predictive design and report: 1.25 days
  • Post-deployment validation: 1.25 days
  • Validation report and playback: 0.5 days
  • Project management at 10%: £425
  • Travel time for two return trips: 1 day
  • Travel expenses: £1,100

£6,775 before tax. 4.25 delivery days and two trips.

Underneath it lists what's included, what's assumed and what isn't covered. Read that part. It's the bit that stops arguments later.

Download it

Add a project name and the client's details if you want them on there, then pick one:

  • Download quote PDF. Ready to send or print.
  • Download editable Word. Change the wording, the prices and the branding. Click the logo to swap it for yours.
The first page of the PDF quote for the Ninja HQ Wi-Fi refresh, showing £6,775 before tax and the services table
Matt gesturing to one side with an open hand
Two minutes ago you had "it depends".

Where the numbers come from

The floor area sets the effort. A small site is half a day of survey and half a day of design. By 10,000 sq ft (about 930 m²) each is a full day. After that it climbs slowly, because the second 10,000 sq ft is quicker than the first: you're already there, the kit's already out.

Everything rounds to the nearest quarter of a day, and reporting is a quarter of the fieldwork with a half-day minimum.

A few examples for a 10,000 sq ft UK office at the example rate, travel included:

  • Remote design only: £1,100
  • Troubleshooting and report: £2,500
  • Site investigation and design: £3,050
  • Investigation, design and validation: £5,550

There's a "How this estimate is calculated" section on the last step that spells out the rules for your project, so none of it is a black box.

What it won't do

I'd rather tell you now.

  • It's a budget estimate, not a quote. It gets you to a sensible number. A real quote needs someone to look at your building.
  • It doesn't count APs. Area tells you how long the work takes. It doesn't tell you how many access points you need. That's what the design is for.
  • It doesn't price hardware, installation or cabling. Services only, before tax.
  • It's one site and one engineer. Twenty branches or a team of four needs a proper conversation.
  • Stadiums and hospitals get a warning. The estimate is a starting point for those. They need specialist scoping, and the calculator says so.

What about my details?

There's no account and nothing to sign up for. The project and client details are optional. They're only sent when you press download, to put them on the document, and they aren't stored.

It works on your phone

Same four steps, one under the other. Useful when someone asks "roughly how much?" in a corridor.

The calculator on a phone, showing the Your site step

Have a go

Pick a site you know, give it two minutes, and see if the number looks right to you.

Open the Wi-Fi Project Calculator

If it's miles off what you'd expect, tell me. It's built on what we've learned designing, surveying and troubleshooting Wi-Fi, and it gets better every time someone pushes back.

Previous
Previous

WN Blog 013 – How to Measure Wi-Fi Roaming Time from a Packet Capture

Next
Next

WN Blog 011 – How Big Is Your Site? Measure It From a Floor Plan