WN Blog 011 – How Big Is Your Site? Measure It From a Floor Plan

Matt on a Wi-Fi survey and Mac presenting, either side of the Floor Plan Area Tool showing a building total of 2,400 square metres

"How big is the site?"

It's the first question in every Wi-Fi quote. It's also the one almost nobody can answer.

I've asked it hundreds of times. I've had "quite big". I've had "about the size of a Tesco". I once asked a warehouse for their floor plan and got an Excel sheet back, with the cells coloured in. Fair play, it was to scale. Sort of.

So we built something to fix it. The Floor Plan Area Tool is free, it runs in your browser, and it tells you the floor area of your site in about two minutes.

Open the Floor Plan Area Tool

Mac scratching his head with question marks above him
"It's quite big." Thanks. Very helpful.

Why the area matters

Area drives everything in a Wi-Fi project. How long the survey takes. How long the design takes. How many days you're paying for.

Guess too low and the quote is wrong before anyone has set foot on site. Guess too high and you're budgeting for work you don't need. Either way somebody has an awkward conversation later.

Our Wi-Fi Project Calculator asks for the area up front, and that's where people were getting stuck. They'd either guess, or go off to find someone in facilities who might know. This tool is for that moment.

What it does

  • Loads your floor plans as images or PDFs, one per floor if you like.
  • Lets you set the scale from one distance you're sure of.
  • Lets you draw round the areas that need Wi-Fi, and mark the bits that don't.
  • Adds it all up, per zone, per floor and for the whole building, in square metres and square feet.

And the bit I care about most: your floor plans never leave your device. There's no upload, no account and no AI looking at your drawings. It all happens in your browser. You can prove it too, which I'll come back to.

The Floor Plan Area Tool's first screen, with a Choose floor plans button and three steps

How to use it

I've used a made-up office for this, Ninja HQ. Two floors, 48 metres by 30, with a corner missing. Your building will be less tidy. Mine always are.

1. Load your plans

Press Choose floor plans, or drag the files onto the page. Pick as many as you want in one go.

PDFs work, and so do PNGs, JPGs and a photo of the fire plan on the wall if that's all you've got. If a PDF has more than one page, it asks which pages are floor plans, so you can skip the title sheet.

2. Set the scale

The tool doesn't know how big your building is until you tell it one real distance.

Click one end of something you know the length of, click the other end, and type the distance. Metres or feet.

Setting the scale: clicking each end of a 48 metre dimension line and typing 48

A doorway works. Most internal doors are about 0.9 m wide, and I've scaled whole floors off one. A long wall works better, because a small slip of the mouse matters less over 48 metres than it does over 0.9. If the drawing has a dimension printed on it, use that.

3. Draw your zones

Now go round the area that needs Wi-Fi. Left click on each corner, then right click to finish. The area appears as soon as you close the shape.

Drawing a zone: clicking round the outside of the office floor, then a right click, and 1,300 square metres appears

Getting around the plan:

  • Scroll to zoom in and out.
  • Hold the space bar and move the mouse to move the plan. No clicking needed.
  • On a trackpad, two fingers move the plan and a pinch zooms.

Zoom right in on the corners. It's the single biggest thing you can do for accuracy.

You can draw as many zones as you want on a floor: the office, the warehouse, the yard. Give each one a name in the panel on the right and it gets its own figure.

4. Leave out what's out of scope

Not everything inside the walls needs Wi-Fi. Lift shafts, stairwells, plant rooms, the comms room, the half of the floor that belongs to the tenant next door.

Choose Exclude area and draw round it the same way. It comes straight off the total.

Excluding areas: drawing round the comms room and the stair and lift core, and the total drops from 1,300 to 1,210 square metres

Watch the corners in that clip. I'm deliberately clicking a bit off the wall, and the corner jumps onto the edge of the zone anyway. That's Snap. It's on by default, so an exclusion sits exactly on the boundary and you don't get slivers left over. If it's getting in your way, the Snap button turns it off.

5. Fix it without starting again

You will misplace a corner. I do it every time.

Choose Select, click the shape, and:

  • Drag a corner to move it.
  • Drag one of the small dots halfway along an edge to add a new corner there.
  • Right click a corner to remove it.
Editing a zone: dragging a small dot to add a corner, then right clicking the corner to remove it again

There's an Undo button as well, and Ctrl or Cmd+Z does the same job.

Mac with a lightbulb above his head, pointing upwards
Mac, discovering he doesn't have to redraw the whole floor.

6. Add the other floors

Press Add a plan and do the same again for the next floor. Each plan has its own scale and its own zones, and the panel keeps a running building total at the top.

Switching between the ground floor and the first floor, with the building total at 2,400 square metres, then switching the units to square feet

A floor that hasn't got a scale yet is flagged as "not counted", so you can't end up with a total that's quietly missing a floor.

Working in feet? Switch to sq ft flips the whole thing. Both units are always on screen, so nobody has to do the 10.764 sum in their head.

7. Take it with you

Three ways to get the answer out:

  • Copy results gives you plain text for an email.
  • Download CSV gives you a spreadsheet with a row per zone.
  • Download picture gives you the plan with your zones drawn on it.
The downloaded picture: the first floor plan with the office zone shaded green, the stairs and atrium void shaded red, and the total along the bottom

Send the picture with the number. It answers "what exactly did you measure?" before anyone asks, and it's saved me a lot of back and forth.

This is what Copy results gave me for Ninja HQ:

Floor area that needs Wi-Fi coverage

Total: 2,400 m² (25,833 sq ft) across 2 floor plans

Ground floor: 1,210 m² (13,024 sq ft)
  Left out of scope (not in the figure above): 90.0 m² (969 sq ft)

First floor: 1,190 m² (12,809 sq ft)
  Left out of scope (not in the figure above): 110 m² (1,184 sq ft)

It works on your phone too

Tap to place a corner, drag with one finger to move the plan, pinch to zoom. The results open over the top of the plan. Handy when you're standing in the building with a photo of the drawing and no laptop.

The tool on a phone: the floor plan with its zones on the left, the results on the right

How accurate is it?

As accurate as your scale and your corners.

I checked it the way I'd check anything: against a tool I trust. I took a real floor plan, scaled it off the same 0.9 m door in both, and drew the same area in Ekahau and in this. Ekahau said 962 m². This said 965 m². That's 0.3%, which is the difference between two people drawing the same outline by hand.

For a budget estimate, that's plenty. You're not ordering carpet.

Don't get me wrong, this doesn't replace a proper survey or a design. It answers one question, how big is it, well enough to get a sensible quote started.

"Never leaves your device". Prove it.

Fair. I wouldn't upload a customer's floor plans to a random website either.

Open your browser's developer tools, go to the Network tab, and load a plan. Nothing goes out. We've also set the site up so the browser itself blocks the page from talking to anyone else, which means it couldn't send your plan somewhere even if we wanted it to.

It does remember your last session, so you can close the tab and carry on tomorrow. That's stored in your browser, on your machine. Start again wipes it.

The only thing we count is page views.

Then put the number to work

Once you know the area, the Wi-Fi Project Calculator turns it into days, travel and cost. There's a button for it at the bottom of the results, and the calculator now points back the other way if you get to the area question and realise you don't know.

The Wi-Fi Project Calculator's area question, with a new line underneath linking to the Floor Plan Area Tool

So the whole journey is: floor plan, area, estimate. No account, no sales form, no waiting three days for someone to call you back.

Matt giving a thumbs up and a wink

Have a go

Find a floor plan, give it two minutes, and see what you get.

Open the Floor Plan Area Tool

If it gets something wrong, or there's a feature you'd use, tell me. That's how most of what's in there got built.

Previous
Previous

WN Blog 012 – What Will Your Wi-Fi Project Cost? Find Out in Two Minutes

Next
Next

WN Blog 010– WiFi Ninjas Join Ekahau